Egis ChillSwing C80H

Not every chiller room has wall space for a sliding door — and not every budget needs automation. The ChillSwing C80H is the hinged answer to the ChillGlide C80 slider: the same 80 mm PIR insulated leaf, the same heated perimeter gasket, on cam-lift stainless hinges that close the door positively and lift it clear of the floor seal on opening. For 0 to +15 C duty, it is the economical workhorse.

The cam-lift hinge is the heart of the design. On opening, the hinge cams the leaf upward, lifting the gasket clear of the threshold so the seal never drags or wears; on closing, the leaf rides down the cam and seats positively into the gasket every cycle — no slamming, no half-closed doors. A porthole or vision panel option lets staff check stock without opening the door, and an inside safety release with a luminous handle keeps every room safe for entrapped personnel.

Egis builds the C80H with the same food-safe GRP face options and stainless hardware as the sliding range, so a facility can mix hinged and sliding doors on one cold store without a visual or maintenance mismatch. Clear openings run from 800 to 1200 mm wide and 2000 to 2400 mm high. If the opening is high-traffic enough to justify automation, the ChillGlide C80 slider is the drop-in upgrade.

A hinged cold-room door lives or dies by its closing geometry. A plain hinge swings the leaf in an arc that drags the gasket across the threshold on every cycle, wearing the seal and leaving the door slightly open half the time. The cam-lift hinge replaces the arc with a lift-and-seat motion: the leaf rises as it opens, clearing the floor seal entirely, and rides the cam back down as it closes, seating squarely into the perimeter gasket with positive, repeatable compression.

The heated perimeter gasket does the other half of the work. In Indian humidity, the seal line of a chiller door is where ice forms first — and ice lifts the gasket, breaking the seal and starting the freeze-thaw cycle that destroys ordinary doors. The C80H's low-voltage gasket heater keeps the seal line just above freezing, so the gasket seats on a clean, dry surface every cycle.