Egis SectionPro S40

The SectionPro S40 is the classic industrial door done properly: a sectional overhead door that slides vertically and parks horizontally under the ceiling, leaving the opening fully clear and the floor space in front of the door usable. The 40 mm CFC-free polyurethane sandwich panels insulate the opening while the galvanised steel faces — available in RAL colours — stand up to industrial service.

Sectional doors earn their place where openings are large and the door must be robust, secure and insulating at once: loading bays, warehouses, workshops and fire-station-style appliance bays. The S40 covers clear openings up to 6000 mm wide and 5500 mm high. Operation ranges from manual and chain-hoist through to fully automatic shaft or torsion drives with remote, push-button or induction-loop activation.

Egis supplies the S40 with the safety package the application demands: anti-fall devices, finger-trap-protected panel joints, and safety edges on automatic versions. As with every Egis industrial door, it arrives as a complete system — panels, track, hardware, drive and controls — installed and commissioned by one team.

A sectional door's panels travel vertically in the track and then horizontally under the ceiling. Nothing swings out, nothing rolls into a bulky coil above the opening, and the full clear height is available the moment the door is open. For a 5-metre-high loading bay, that geometry is the difference between a usable opening and a compromised one.

The 40 mm sandwich panel is the insulation and strength story in one: two galvanised steel skins bonded to a CFC-free polyurethane core give a rigid, insulating panel that resists both impact and heat transfer. Panel joints are the weak point of cheap sectional doors — the S40's joint profile resists finger trap and maintains the insulation line across the joint.